top of page

WARRANTY POLICY AND COMMERCIAL TERMS AND CONDITIONS

This document constitutes the Warranty Policy for the Products supplied by GRAPHICS AND CONVERTING SOLUTIONS, de C.V. (“GRACOS”), with its registered address at Calle 3 55, Lote Fracc B, Naucalpan de Juárez, State of Mexico, Postal Code 53370, Mexico, issued to the Customer in accordance with the Mexican Federal Consumer Protection Law (Ley Federal de Protección al Consumidor).

This Warranty Policy applies to the Products and may also be consulted as part of the GRACOS Terms and Conditions available on the GRACOS website at www.gracos.com.mx, subject to the following provisions:

Definitions

For purposes of this Warranty Policy, capitalized terms not expressly defined herein shall have the meanings assigned to them in the GRACOS Terms and Conditions, which the Customer acknowledges having read, understood, and accepted, and which are available on the GRACOS website at www.gracos.com.mx.

​

Terms of Use

 

By placing an order or submitting a Purchase Order to GRACOS, the “Customer” acknowledges and accepts the provisions of this Warranty Policy and Commercial Terms and Conditions.

​

Subject to the provisions established herein, GRACOS shall be liable for latent defects or manufacturing defects in the Products, as provided by applicable law and in accordance with the Warranty provisions.

 

Accordingly, the Products shall be covered by a warranty period of one hundred eighty (180) days from the date of delivery to the “Customer,” provided that the Products have been stored in their original packaging, in an enclosed, dry environment, at a temperature not exceeding 40°C (the “Warranty”).

 

The Products are supplied for use “as is,” with the understanding that the “Customer” must have previously conducted accelerated aging, storage, and conditioning tests on the product intended to be packaged and must have verified that the Products satisfactorily meet the expected requirements regarding functionality, protection, and shelf life.

 

With respect to the graphics to be printed by GRACOS, the “Customer” represents, acknowledges, and agrees that:

​

  1. The “Customer” is the sole owner or authorized licensee of any rights associated with the Designs provided to GRACOS, including intellectual and/or industrial property rights, and/or is otherwise duly authorized to provide such Designs to GRACOS and permit their use in connection with the Services.

  2. The Designs provided by the “Customer” to GRACOS do not infringe upon any intellectual property, industrial property, or commercial rights of third parties.

  3. The Services are strictly and exclusively limited to the manufacturing of digitally printed flexible packaging solutions, supplied either as preformed packages or in rollstock format. Consequently, the Services do not include any involvement by GRACOS in the creation, modification, or alteration of the Designs provided by the “Customer,” nor do they include packaging, filling, or product-packing services, or any other similar or related services.

  4. No commercial or legal relationship exists or shall exist between GRACOS and the “Customer” other than the relationship established through the provision of the Services.

​

Consequently, the “Customer” hereby releases GRACOS from any civil, commercial, criminal, administrative, or other liability and agrees to defend, indemnify, and hold harmless GRACOS, including, where applicable, its affiliates, subsidiaries, shareholders, directors, officers, employees, collaborators, and advisors, against any lawsuit, claim, complaint, proceeding, legal action, or demand brought against them.

​

Such indemnification shall include legal fees and expenses incurred by GRACOS in its defense and shall apply to claims arising from:

​

(i) Any infringement or violation of intellectual and/or industrial property rights relating to the Designs.

(ii) Any violation of applicable domestic or international laws or regulations concerning the goods, products, or materials packaged, contained, or otherwise enclosed within the bags or pouches.

(iii) Any violation of applicable domestic or international laws or regulations governing packaging, labeling, sanitary requirements, environmental standards, or any other applicable standards or requirements.

(iv) Any other contractual, non-contractual, or legal breach, infringement, or violation unrelated to the provision of the Services.

​

GRACOS reserves the right, at its sole discretion, to reject any request for Services that it considers may involve violations of applicable laws or intellectual property rights.

​

GRACOS makes no warranties regarding the use or performance of the Products beyond what may be demonstrated through Print Proofs, provided that the “Customer” has requested such Print Proofs.

​

If the “Customer” has not requested a Print Proof and has received Final Products, GRACOS shall not be liable for any variations or differences in the expected Designs, colors, or dimensions of the Final Products. In such cases, this Warranty Policy shall apply exclusively to latent defects or manufacturing defects.

​

The GRACOS Product Warranty takes into consideration the various manufacturing processes involved in producing a bag or pouch.

As with any industrial manufacturing process, these operations involve variations generally accepted within the flexible packaging manufacturing industry, in accordance with the applicable specifications established on the Website.

​

In the event of quality defects, the “Customer” must conduct a batch inspection in accordance with the Military Standard sampling procedures, using an Acceptable Quality Limit (AQL) of 6.5.

If the number of critical defects, as described below, exceeds the acceptance limits established in the corresponding Military Standard AQL 6.5 sampling table, the Warranty shall apply to the defective units only, which shall constitute the sole responsibility of GRACOS.

​

Accordingly, upon receiving the Products, the “Customer” accepts the following manufacturing tolerances and conditions, subject to the applicable specifications for use and storage:

​

1. Quantity: The “Customer” acknowledges and accepts that the final quantity of Final Products delivered may vary as follows:

  1. For orders of fewer than 5,000 units, the quantity may vary by ±30%.

  2. For orders of 5,000 units or more but fewer than 15,000 units, the quantity may vary by ±20%.

  3. For orders of 15,000 units or more but fewer than 30,000 units, the quantity may vary by ±15%.

  4. For orders of 30,000 units or more, the quantity may vary by ±10%.

​

2. Thickness :The thickness of the Product may vary by ±10%.

​

3. Dimensions and Accessory Placement : The final dimensions of the Product, as well as the placement of accessories such as Degassing Valves, Tin Ties, Zippers, Butterfly Zippers, Hang Holes, and Tear Notches, may vary by ±5 mm. It shall be considered an accepted manufacturing standard for such variations to occur in no more than 10% of the total order quantity.

​

4. Appearance

 

  1. If the “Customer” has requested and approved a Print Proof, it is considered normal for the Final Products to exhibit a color variation of up to 3.0 Delta E (ΔE) compared with the approved Print Proof. Delta E is a universally recognized metric used to measure the difference between two colors.If the “Customer” has waived the Print Proof and proceeded directly with the Final Products, GRACOS shall not be held responsible for any color variation.

  2. Regardless of whether the “Customer” has requested or approved a Print Proof, the “Customer” acknowledges that color appearance may vary significantly in areas where heat and pressure are applied to create seals or install accessories, including Degassing Valves, Tin Ties, Zippers, Butterfly Zippers, Hang Holes, and Tear Notches.The “Customer” expressly accepts such variations, and GRACOS shall not be held responsible for them.

​

The Products may not be modified, manipulated, or altered by adding components or accessories that were not included in the original delivery or in the Product specifications established by GRACOS.

​

Any improper use or handling, misuse, abuse, lack of maintenance or care, intentional or accidental damage, unforeseen events, force majeure, modification, or alteration of the Product structures shall invalidate this Warranty Policy.

 

The Warranty shall also be invalidated by any similar circumstances or causes attributable to third parties unrelated to GRACOS.

Any oral or written statement made by an employee, collaborator, or representative of GRACOS shall not constitute an additional warranty or create any obligation or liability for GRACOS.

 

These Terms and Conditions and this Warranty Policy constitute the only warranty provisions recognized and accepted by both GRACOS and the “Customer”.

 

If the “Customer” does not request a Print Proof and instead orders Final Products directly, GRACOS shall not be liable to the “Customer” for any variations or differences in the expected Designs, colors, or dimensions of the Final Products.

 

In such cases, the Warranty applicable to the Final Products shall be limited exclusively to latent defects or manufacturing defects.

​

Procedures for Making a Warranty Claim

 

If a “Customer” receives a Final Product that does not comply with the provisions of this Warranty Policy, the “Customer” must submit a written warranty claim addressed to GRACOS.

 

The claim may be submitted through any of the following channels:

  • Email: info@gracos.com.mx

  • Postal address: Calle 3 55, Lote Fracc B, Naucalpan de Juárez, State of Mexico, Postal Code 53370, Mexico.

  • Other contact channels: Any additional communication methods made available to the “Customer” by GRACOS through its Website.

​

The written claim must clearly describe the defect requiring correction and identify the specific component or element of the Products affected.

​

GRACOS shall promptly process the request and carry out any repairs that may be applicable, assuming responsibility for such repairs in accordance with applicable law.

 

For these purposes, the “Customer” must send the Products subject to the Warranty to the GRACOS address indicated above for inspection and repair.

 

The time required to perform repairs covered by this Warranty Policy, where applicable, shall not be counted toward the original Warranty period.

 

Once the Products have been repaired, a new warranty period shall commence with respect to the repairs performed and any parts or goods

replaced, while the original Warranty shall remain in effect for the remaining portions of the Products.

 

If the “Customer” has exercised the Warranty and defects or failures attributable to GRACOS persist, GRACOS shall be required to perform any additional repairs necessary to correct such defects immediately.

 

Furthermore, GRACOS shall provide any applicable compensation or allowances when the repaired Product is not restored to a condition suitable for its intended use or purpose within the Warranty period.

 

If GRACOS determines that the defects cannot be repaired, it may elect, upon receiving the warranty claim, to replace the corresponding Products.

​

In such cases, the provisions of Item I below shall apply, without any additional compensation being due.

 

If GRACOS elects to repair the Products in fulfillment of the Warranty but fails to do so, it shall be subject to the applicable compensation provisions and the remedies established in the following paragraph.

 

If, after the Warranty has been exercised, GRACOS has still failed to correct the defects, the “Customer” may choose either of the following remedies:

  1. Product Replacement: Request replacement of the Products, in which case GRACOS shall assume all expenses associated with such replacement.

  2. Contract Termination and Refund: Request termination of the transaction and return of the Products, in which case GRACOS shall be obligated to refund the amount paid by the “Customer”.

​

This Warranty Policy does not cover expenses arising from loss of use while the damaged component is being repaired.

GRACOS shall not be liable for any incidental or consequential losses or damages.

 

Likewise, the Warranty does not cover expenses arising from loss of use while a damaged Product is being repaired or replaced.

GRACOS shall not be liable for any incidental or consequential losses or damages.

​

The Warranty shall not apply to defects or damage caused by improper use or handling, misuse, abuse, modification or alteration of Product structures, lack of maintenance or care, intentional or accidental damage, unforeseen events, force majeure, or any other similar circumstances.

​

The Warranty shall also not apply to defects or damage attributable to third parties unrelated to GRACOS.

​

The “Customer” shall be responsible for any damage caused by their own fault or negligence, or by the fault or negligence of any person who uses, handles, or operates the Products.

​

Accordingly, the “Customer” shall also be liable for any damage caused to third parties and agrees to indemnify and hold GRACOS harmless in such circumstances.

​

The Products MUST NOT be used for any unlawful purpose, and such use is expressly prohibited.

​

In the event of unlawful use, this Warranty Policy shall become invalid, and the “Customer” agrees to release GRACOS, its affiliates, subsidiaries, directors, officers, and collaborators from any liability arising from such use.

​

Furthermore, the “Customer” agrees to defend, indemnify, and hold harmless GRACOS against any claims, complaints, lawsuits, litigation, legal proceedings, expenses, costs, penalties, fines, damages, losses, and reasonable attorneys' fees incurred in the defense of GRACOS that may arise from the unlawful use of its Products.

​

Last updated: November 17, 2026

bottom of page